Your garage door repair in The Pnery is just around the corner. But just like any other mechanical device requires regular maintenance to perform its best day-in and day-out. This includes cleaning and lubricating your garage door hinges, rollers and track on an annual basis. Cleaning your garage door more or track is the first step. Don’t use water or other chemicals as this can cause build up and do more damage than good. Instead, use a broom to brush off any dust and debris. Be particularly careful to clean out spider webs and other insect nests that might capture other dirt and particles that can clog up the tracks and wheels.
For garage doors in consider doing this seasonally after the brown pine pollen has finished covering the ground. In other areas, the spring is a good time to do maintenance because winter vehicle traffic brings an abundance of dirt and grime into the garage.
Photo eye is out of alignment for garage door repair
Top reasons why you need garage door repair. This is part of a continuing series.
7. The garage door limit settings isn't set properly
Often you’ll notice that your garage door torsion spring won't allow the door to close. It immediately goes back up instead of staying in the closed position. This issue usually arises with brand new garage doors that were just installed or older models that may need to be reset. If this happens, the most likely culprit is the open and close limit settings of your garage door opener.
This limit range tells the garage door opener how far the door should move before it’s fully closed. If your settings are too high, the door will hit the ground before the opener thinks it should and assume the door is hitting something in its path. It will then automatically reverse to prevent crushing whatever is beneath it.
There are knobs or dials located somewhere on your garage door motor that you can use to adjust the limit settings. The exact location and resetting procedures will vary depending on the brand and model of garage door you have. Your owner’s manual should have more specific information on how to adjust your limits. You may need to experiment with a few adjustments before finally getting the correct setting. If you find that adjusting the limit settings isn’t working, it might be time to call a technician to come and help get your garage door to stay closed.
In The Pnery go with the best for garage door repair
Some our services includes:
– Garage Door Operator Installation and Repair
– Springs & Cables Installation and Repair
– Garage Door Remote programming
– Sales & Installation of Wood, Steel and Aluminum Garage Doors
By focusing on your home, we’re able to provide you with a number of different brands including:
– Overhead Door
That’s every major type of door available on the market. We provide sectional doors as well as side by side doors which swing or tilt up.
As a finishing touch, all of our products are made with powder coated springs. We’ve found this small choice makes a big difference — your door will last longer and repel rust longer. Many companies provide oil-tempered or galvanized springs, which wear out after years of use under all weather conditions.
Ace’s Garage Doors makes every effort to offer American-made products — if this is something that you’d like, just ask us and we’ll help out.