Emergency Garage Door Repair in Lakewood

Your garage door repair in Lakewood is just around the corner.  But just like any other mechanical device requires regular maintenance to perform its best day-in and day-out. This includes cleaning and lubricating your garage door hinges, rollers and track on an annual basis.  Cleaning your garage door more or  track is the first step. Don’t use water or other chemicals as this can cause build up and do more damage than good. Instead, use a broom to brush off any dust and debris. Be particularly careful to clean out spider webs and other insect nests that might capture other dirt and particles that can clog up the tracks and wheels.

For garage doors in consider doing this seasonally after the brown pine pollen has finished covering the ground. In other areas, the spring is a good time to do maintenance because winter vehicle traffic brings an abundance of dirt and grime into the garage.

Things to know about garage door torsion springs

Garage Door Springs

Sticking garage doors can be caused by a few issues. If you have a remote garage opener, check batteries, sensors and switches first. If you open the garage door manually, check for obstructions in the wheel track first.Different weather conditions and temperatures can affect the lubricant. Using more of a proper type may help sticking doors. One of the major causes of stuck garage doors is that they are hung unevenly. Make sure all the cables and springs that hold them are even length and have the same springiness from side to side.

The Door Moves Unevenly and Shimmies Side to Side
The easiest way to solve and unevenly opening garage door is by removing an obstruction or debris in the tracks where the wheels run. Clear and clean those first to see if the problem is solved.If not, check the quality of the springs. They should be the same length and stretch the same amount. On doors with automatic openers, the motors that control both sides of the door may be faulty. A replacement may be in order.

Loud Noises When Opening or Closing the Garage Door
Loud screeching, grinding or squealing noises coming from the garage door signifies a problem with dirt or debris in the track or lack of lubrication. Clean the entire track where the door wheels run without harsh cleaners to remove dirt and anything else that could get in the way of a smooth operation.Use oil specially designed for garage doors, or a standard hardware lubricant such as WD-40, on all the door tracks and hardware. Run the door up and down a few times to check that the problem is solved.

Garage Door Falls Too Quickly When Lowering It
A falling garage door can pose a great risk of injury to people who are opening or closing it. This problem is caused by broken cables or overly loose springs. With the door in the closed position, carefully examine all the apparatus to determine what the problem is. Do not replace springs or cables on your own; instead consult a professional garage door repair man. There is several safety hazards related to replacing garage door springs without the proper equipment or knowledge.

Remote Control Door Opener Fails to Work
After checking the batteries and switches to make sure the device is powered up, the garage door still might have problems opening or closing correctly. If none of the above solutions helps – checking cables and clearing the tracks – you may have to either replace the garage opener motor or sensors.
In Lakewood go with the best for garage door repair

Top reasons why you need garage door repair. This is part of a continuing series.
3. The Track Is NOT Aligned Properly
Emergency garage door repair may be needed if your garage door track is out of alignment and you n, it can be a serious issue. The metal track your door runs on needs to be aligned properly in order for your door to move. If you see gaps between the rollers and rail, or bends in the rails themselves, you have a problem. The heavy weight of the door can compound these issues and make them worse until it becomes dangerous to operate your door.

If the track is misaligned, but the door still moves, there are a few things you can do to attempt to remedy the issue on your own. You’ll know that it’s misaligned if you hear a rubbing noise when the garage door reaches a certain spot on the tracks each time it opens and closes. Sometimes the door may even slow down slightly when it hits this spot.

To realign the track, first loosen the screws that hold the track to the frame. Then, gently tap the track with a rubber mallet to move it back into the proper position. Use a level to ensure it’s perfectly straight. Once you have the alignment correct, tighten the screws securely to ensure the track won’t move and cause more issues when opening your garage door. You’ll need to repeat this same process on the other tracks as well, as these may also be out of alignment.

If the door won’t move at all because of an alignment issue, then this problem isn’t one that you should try to tackle yourself. A garage door professional will have the necessary equipment needed to safely realign and repair your garage door. Additionally, if the track misalignment is beyond repair, a professional can install a new garage door track for you. Garage Door Fixer

Denver