Your garage door repair in Louisville is just around the corner. But just like any other mechanical device requires regular maintenance to perform its best day-in and day-out. This includes cleaning and lubricating your garage door hinges, rollers and track on an annual basis. Cleaning your garage door more or track is the first step. Don’t use water or other chemicals as this can cause build up and do more damage than good. Instead, use a broom to brush off any dust and debris. Be particularly careful to clean out spider webs and other insect nests that might capture other dirt and particles that can clog up the tracks and wheels.
For garage doors in consider doing this seasonally after the brown pine pollen has finished covering the ground. In other areas, the spring is a good time to do maintenance because winter vehicle traffic brings an abundance of dirt and grime into the garage.
A good garage door fixer will investigate first
Why change your remote
Garage door openers are fairly simple mechanisms that tend to last a long time. Even if yours is still working fine, there are good reasons to consider replacing it. Newer models offer increased safety, security and convenience.
Here are some of the primary reasons why you might want to buy a new garage door opener.
Since 1993 garage door openers have been required to be equipped with a safety reversing mechanism.
This feature utilizes two sensors about six inches above floor level on both sides of the door. When any object, such as a child or pet, runs through the light beam created by these sensors while the door is closing, the door immediately stops and reverses.
If your garage door opener does not have a safety reversing feature, or if the one it does have no longer works, replacing the opener is highly recommended.
Does your garage door opener wake people up or otherwise disrupt the household because it makes so much noise? If so, a new opener will almost certainly be quieter.
The original style of garage door opener opened and closed with a chain drive. If you can see something that looks like a bicycle chain near the motor unit of your opener, consider replacing it with a screw drive or belt drive garage door opener. Even a newer model chain drive unit will likely be quieter than an older model
In Louisville go with the best for garage door repair
The Door Moves Unevenly and Shimmies Side to Side
The easiest way to solve and unevenly opening garage door is by removing an obstruction or debris in the tracks where the wheels run. Clear and clean those first to see if the problem is solved.If not, check the quality of the springs. They should be the same length and stretch the same amount. On doors with automatic openers, the motors that control both sides of the door may be faulty. A replacement may be in order.
Loud Noises When Opening or Closing the Garage Door
Loud screeching, grinding or squealing noises coming from the garage door signifies a problem with dirt or debris in the track or lack of lubrication. Clean the entire track where the door wheels run without harsh cleaners to remove dirt and anything else that could get in the way of a smooth operation.Use oil specially designed for garage doors, or a standard hardware lubricant such as WD-40, on all the door tracks and hardware. Run the door up and down a few times to check that the problem is solved.
Garage Door Falls Too Quickly When Lowering It
A falling garage door can pose a great risk of injury to people who are opening or closing it. This problem is caused by broken cables or overly loose springs. With the door in the closed position, carefully examine all the apparatus to determine what the problem is. Do not replace springs or cables on your own; instead consult a professional garage door repair man. There is several safety hazards related to replacing garage door springs without the proper equipment or knowledge.
Remote Control Door Opener Fails to Work
After checking the batteries and switches to make sure the device is powered up, the garage door still might have problems opening or closing correctly. If none of the above solutions helps – checking cables and clearing the tracks – you may have to either replace the garage opener motor or sensors.