Your garage door repair in Parker is just around the corner. But just like any other mechanical device requires regular maintenance to perform its best day-in and day-out. This includes cleaning and lubricating your garage door hinges, rollers and track on an annual basis. Cleaning your garage door more or track is the first step. Don’t use water or other chemicals as this can cause build up and do more damage than good. Instead, use a broom to brush off any dust and debris. Be particularly careful to clean out spider webs and other insect nests that might capture other dirt and particles that can clog up the tracks and wheels.
For garage doors in consider doing this seasonally after the brown pine pollen has finished covering the ground. In other areas, the spring is a good time to do maintenance because winter vehicle traffic brings an abundance of dirt and grime into the garage.
Safety first with overhead door repair
Operating Your Door While Power Is Out
Pull the rope back and as close to the garage door opener motor as possible. This will keep the rope out of the way while you operate the door in manual mode. Hopefully your power is out for only a short period of time, and you’ll soon return to automatic operation of your garage door opener.
If not, don’t worry. Homeowners used garage doors manually for years before automatic openers became widely available. It’s more effort and certainly less convenient, but a power outage shouldn’t prevent you from using your garage however you like.
What To Do When Power Returns
When the power comes on, you’ll need to reattach your garage door to the automatic opener. Pull down on the handle at the end of the rope again, just as you did when you first disengaged the opener. Then pull up on the door until you hear or feel it snap back into place once more. Alternatively, you can also push the button on your automatic opener. You’ll see the spring attachment reconnect once the opener reaches a certain point — and you’ll be back in business again.
If for any reason your garage door fails to engage again with the automatic opener after a power outage, you may need to call a provider of garage door repairs. It’s always possible that the return of power has led to a power surge that’s made the automatic opener inoperable.
In Parker go with the best for garage door repair
Older garage door openers were vulnerable to thieves. Because their remote controls functioned with a fixed code, someone with a special device could sit outside your house and find the code, allowing them to open the garage door.
New garage door openers have a “rolling code” feature, which changes the code every time the unit is used.
Bad guys can no longer duplicate the code and get into your garage uninvited.
Older garage door openers did not offer keypads that could be mounted outside the garage. This handy feature allows you to enter a code into the keypad that will open the garage door. No keys required.
You may be able to buy a keypad to install with your existing garage door opener. If not, though, this might be a good reason to upgrade. Newer keypad units even eliminate the need to remember a code. They operate by touch, using fingerprint detection to open the door.
One of the big inconveniences of a power outage is often the inability to operate the garage door opener. Garage door openers are now available with battery backup systems that will kick in automatically when you lose electrical power.