Your garage door repair in Centennial is just around the corner. But just like any other mechanical device requires regular maintenance to perform its best day-in and day-out. This includes cleaning and lubricating your garage door hinges, rollers and track on an annual basis. Cleaning your garage door more or track is the first step. Don’t use water or other chemicals as this can cause build up and do more damage than good. Instead, use a broom to brush off any dust and debris. Be particularly careful to clean out spider webs and other insect nests that might capture other dirt and particles that can clog up the tracks and wheels.
For garage doors in consider doing this seasonally after the brown pine pollen has finished covering the ground. In other areas, the spring is a good time to do maintenance because winter vehicle traffic brings an abundance of dirt and grime into the garage.
Don't jump the gun to garage door repair: check the door's path
Why change your remote
Garage door openers are fairly simple mechanisms that tend to last a long time. Even if yours is still working fine, there are good reasons to consider replacing it. Newer models offer increased safety, security and convenience.
Here are some of the primary reasons why you might want to buy a new garage door opener.
Since 1993 garage door openers have been required to be equipped with a safety reversing mechanism.
This feature utilizes two sensors about six inches above floor level on both sides of the door. When any object, such as a child or pet, runs through the light beam created by these sensors while the door is closing, the door immediately stops and reverses.
If your garage door opener does not have a safety reversing feature, or if the one it does have no longer works, replacing the opener is highly recommended.
Does your garage door opener wake people up or otherwise disrupt the household because it makes so much noise? If so, a new opener will almost certainly be quieter.
The original style of garage door opener opened and closed with a chain drive. If you can see something that looks like a bicycle chain near the motor unit of your opener, consider replacing it with a screw drive or belt drive garage door opener. Even a newer model chain drive unit will likely be quieter than an older model
In Centennial go with the best for garage door repair
5. Something is blocking the door's path
As mentioned before, we are a 24 hour garage door repair service. Garage doors are designed with a reversing mechanism that prevents them from crushing objects in their path. If you find that your garage door closes part way and then goes back up, this can be triggered by objects on the ground blocking their path such as garbage cans or toys. It could also be caused by a buildup of debris on the tracks that prevents the rollers from moving forward. This could include small items like rocks, gum or mud buildup. If the door hits even a small object on the track, it will go back up to avoid crushing whatever is underneath it.
Inspect the area around your garage door to see if something is blocking the photo eye sensors. Then look at the tracks to see if there is any buildup on the inside. You’ll need to get a step ladder to look at the tracks on the top part of your garage, as it will be difficult to see from ground level. It may also not be a bad idea to proactively wipe down your garage door tracks periodically to prevent this type of buildup from occurring. Running a damp rag along each track should be enough to remove anything that’s lingering on the tracks.