Your garage door repair in is just around the corner. But just like any other mechanical device requires regular maintenance to perform its best day-in and day-out. This includes cleaning and lubricating your garage door hinges, rollers and track on an annual basis. Cleaning your garage door more or track is the first step. Don’t use water or other chemicals as this can cause build up and do more damage than good. Instead, use a broom to brush off any dust and debris. Be particularly careful to clean out spider webs and other insect nests that might capture other dirt and particles that can clog up the tracks and wheels.
For garage doors in consider doing this seasonally after the brown pine pollen has finished covering the ground. In other areas, the spring is a good time to do maintenance because winter vehicle traffic brings an abundance of dirt and grime into the garage.
Problems related to garage door repair
Top reasons why you need garage door repair. This is part of a continuing series.
1. The Transmitter Batteries Are Dead
This may sound obvious, but your garage door transmitters need power to work. If the batteries in your transmitter are dead, the transmitter won’t be able to send a signal to your garage door to open.
First, check the garage door springs then check the wall inside your garage still opens your garage door when pressed. If it does, then the transmitter in your car likely just needs a simple battery replacement. If you have more than one car transmitter for your garage door, then your other transmitters will likely need new batteries soon as well, since they were probably installed around the same time.
Changing the battery on your garage door transmitter is pretty simple. On most, you can simply slide the door open on the back of the transmitter and remove the battery. Others may be screwed in to keep the battery more secure, so this type of transmitter will require a screwdriver to open.
After removing the old batteries, make sure the plus and minus signs line up with the plus and minus signs on the inside of the transmitter. Otherwise, the new battery won’t work in the transmitter, and it could give you a false sign that something else may be wrong. Once the battery is in place, test the transmitter, and if it works, replace the transmitter door.
In go with the best for garage door repair
We all come to depend on our automatic garage door openers. They deliver wonderful convenience for our busy lives — but we often tend to take them for granted.
When something like a power outage renders your garage door useless, it suddenly becomes a huge inconvenience. How are you supposed to get your car inside the garage — or get it out? Do you need to call a company that offers garage door repairs?
Fortunately, the answer to that question is no. Opening your garage door during a power outage is simple once you know how to do it. Here’s a look at getting into your garage when your garage door opener is rendered unusable due to a power outage.
Start with the Bypass
Your garage door is most likely equipped with a function that turns off the automatic opener and allows you to use the door manually. Have you noticed a rope hanging down from your garage door opener system — probably a rope with a handle connected to the end? That’s your bypass trigger.
When you yank down on this handle, the opener disengages from the automatic system that’s become unusable by the power outage. It’s a good idea to pull down on the handle and activate your bypass only when the garage door is closed. If you choose to do so while the door is open, the weight of the door could cause it to slam shut at a violent speed — which could damage the door or be dangerous to objects, animals or people standing nearby.